Tag Archives: valve stem

Huf RDV Valve Stem Measurements

Posted on by

Be in the know before switching from OE wheels to aftermarket. Depending on the size of the wheel, you may need to change the Huf RDV valve stem. We’ve compiled a list of RDV valve stem measurements to help you determine the correct valve for your wheel. You can purchase the Huf RDV valve stem here. 

Image

RDV001 GEN1  Gen 1 TPMS Valve 43cm long
 RDV002 GEN1  Gen 1 TPMS Valve 48cm long
 RDV003 GEN1  Gen 1 TPMS Valve 49cm long
 RDV004 GEN1  Gen 1 TPMS Valve 51cm long
 RDV005 GEN1  Gen 1 TPMS Valve 56cm long
 RDV006 GEN1  Black Gen 1 – TPMS Valve 43cm long
 RDV007 GEN1  Titanium Gen 1 TPMS Valve 43cm long
 RDV021 GEN2 Gen 2 TPMS Valve 43cm long
 RDV022 GEN2 Gen 2 TPMS Valve 48cm long
 RDV023 GEN2 Gen 2 TPMS Valve 49cm long
 RDV024 GEN2 Gen 2 TPMS Valve 51cm long
 RDV025 GEN2 Gen 2 TPMS Valve 56cm long

TPMSDirect.com is your #1 source for the latest in OEM TPMS technology, industry news, and technical know-how. 

TPMSDirect
157 Viking Ave.
Brea, CA. 92821
(714) 482-3996 M-F 9am-5pm

Huf Generation 1 RDV Valve Installation Instructions

Posted on by
Fore more information about the Huf Generation 1 RDV Valve Stem, please click here. 
Installation Instructions:
1. Before inserting the valve, please ensure that the valve hole and the surface of the rim are cleaned and even to allow for proper sealing.
2. Insert valve through rim of wheel.
3. Insert metal rod into the side hole on the bottom of the valve beneath the rim lip.
4. Place washer over the top of the valve and then tighten the nut to 4Nm of torque.
5. Take screw and affix the sensor making sure the sensor is in full contact with the rim.
6. Tighten the bottom screw using a hex driver to 4Nm.
7. Install tire on the rim as directed for all TPMS sensors.
8. Tighten the valve cap to complete the process.
Image
157 Viking Ave.
Brea, CA. 92821 
(714) 482-3996 

TPMS Sensor and Service Kit Replacement

Posted on by

When Should I Replace My TPMS Sensor?

TPMS sensors need to be replaced if the sensor assembly fails or is damaged. Some TPMS sensors are manufactured as one-piece units, with fixed components. If your one-piece TPMS unit appears to be damaged, the entire assembly will need to be replaced, even if the damage is only on the valve stem.

One-piece sensors are slowly being phased out and replaced by TPMS assemblies with removable/replaceable valve stems and service kits.

If your TPMS assembly appears to be damaged, please contact us at customer.service@TPMSDirect.com and we’ll help you determine the correct replacement TPMS sensor or TPMS components for your vehicle.

When Should I Replace My TPMS Service Kit?

The TPMS service kit usually contains the following components: valve core, valve nut, seal, seal washer, and valve cap. The service kit needs to be replaced every time a tire is serviced.

  • Fitting new tires
  • Puncture repairs
  • Changing rims
  • Electronic failure
  • Damage during tire service
  • Damage by road hazards
  • Valve core or nut seizure

TPMSDirect
157 Viking Ave. Brea, CA. 92821
www.TPMSDirect.com

HUF TPMS Sensor Blowout!

Posted on by

We’re offering great deals on the Huf RDE001 (433MHz), RDE008 (433MHz), and RDE011 (433MHz) OE TPMS sensors.

Supplies are limited! Contact us at Wholesale@TPMSDirect.com for more information!

Huf RDE001
Frequency: 433MHz
Compatible with: Audi, Bentley, Ferrari, Maserati, Porsche, Volkswagen

Huf RDE008
Frequency: 433MHz
Compatible with: BMW, Mini

Huf RDE011 (supersedes the Huf RDE007 and RDE010)
Frequency: 433MHz
Compatible with: Audi, Bentley, Ferrari, Lamborghini, Maserati, Porsche, Volkswagen

All Huf sensors include the GEN 2 RDV021 valve stem and service kit. 

ImageImage Image 

Huf Generation 2 TPMS Valve Kit Assembly

Posted on by

Huf has released its generation 2 TPMS valve kit. This new RDV valve kit will feature fewer components than its predecessor and is simpler to assemble.

For a breakdown of components and to see how the generation 2 valve kit assembly compares to the generation 1 kit, please click here or go to: http://www.tpmsdirect.com/Huf_Releases_Gen2_TPMS_Valve_Kit_a/813.htmImage

TPMSDirect
157 Viking Ave.
Brea, CA. 92821
www.TPMSDIRECT.com

Huf TPMS Valve and Sensor Installation Instructions

Posted on by

Image

One of the leading causes of TPMS damage is from mishandling the unit and its components during the installation process. 

Huf tire pressure monitoring sensor (TPMS) and valve stem installation and mounting instructions have been uploaded to our “TPMS How-To” section under “3. Installation Guides and Mounting Solutions.” The mounting instructions are intended to help guide users in the installation of Huf TPMS without damaging the sensor or its components. 

For Huf TPMS and valve installation procedures, please click here or go to: http://www.tpmsdirect.com/Huf_TPMS_Sensor_Installation_Procedures_a/804.htm

Please feel free to email us with any questions or inquiries at Customer.Service@TPMSDirect.com.

TPMSDirect
157 Viking Ave.
Brea, CA 92821

 

Myers Tire Supply Introduces Interactive TPMS Education Kit

Posted on by

Myers Tire Supply Distribution Inc. has introduced its Interactive TPMS Education Point of Purchase Kit. This comprehensive package is designed to assist salespeople, service bays, and tire shops in educating the consumer about the various benefits of TPMS and why the TPMS service kit should be replaced anytime the sensor is removed from the wheel. 

Image

The TPMS Education Kit includes a counter top display, 100 consumer brochures, and an informative wall poster. 

For more details and ordering information, please go to: http://www.tpmsdirect.com/Myers_Tire_Supply_Releases_Interactive_TPMS_Education_Kit_a/771.htm

TPMSDirect is your #1 source for the latest in OEM TPMS technology, industry news, and technical know-how. 

157 Viking Ave.
Brea, CA. 92821
(714) 482-3996 

 

 

Featured Item: Ken-Tool reCore TPMS Sensor Saver System

Posted on by

We are now taking orders for the remarkable new TPMS service tool: Ken-Tool reCore TPMS Sensor Saver System

ImageThe Ken-Tool reCore extends the life of broken tire pressure monitoring sensors (TPMS) when galvanic corrosion has damaged the valve stem and core. TPMS sensors can be repaired on the vehicle without having to dismount the wheel and tire. A time and money saver for both the shop and customer! Essential for any repair bay that services TPMS!

The Ken-Tool reCore TPMS Sensor Saver System includes the following:

  • 12 TPMS reCore Sensor Savers
  • TPMS Valve Core Torque Tool (preset at 4-in-lbs)
  • High Speed Dual Cutter Countersink Drill Bit
  • Precision Tap
  • Tap Holder with T-Handle
  • Bottle Ken-Lok Thread Sealant
  • Easy to Follow Instructions
  • Blow-molded Plastic Storage Case

Click here to purchase the Ken-Tool 29980 reCore TPMS Sensor Saver System Starter Kit (12-Pc)

157 Viking Ave.
Brea, CA. 92821
(714) 482-3996

Ken-Tool reCore TPMS Repair Kit

Posted on by

TPMSDirect is getting ready to stock Ken-Tools revolutionary TPMS repair tool: Ken-Tool reCore. 

What makes the Ken-Tool reCore so special? It allows a technician to repair TPMS sensors without even taking the tires or sensors off the vehicle. What was a headache to fix before is now made easy with the reCore. The reCore eliminates the need to replace an entire sensor module, rebalance the wheel, and reset the TPMS sensor.

The tool is an all in one fix. It provides everything you need to drill out the corroded valve core, tap new threads, and install a new, corrosion proof valve core and stem. Installing a new valve stem with the tool can take as little as 10-15 minutes.  Time, money, and stress are avoided. 

There are over 400 million sensors on the road today. Take advantage of this growing market and implement the Ken-Tool reCore system into your standard procedures. 

Stay tuned for more updates on price and availability. 

Image

157 Viking Ave.
Brea, CA. 92821
(714) 482-3996 
We operate Monday-Friday 8:00am-5:00pm PST